大鼠体内复方清开灵代谢物的分析

建立了复方中药清开灵代谢物的液相色谱-质谱/质谱分析方法。采用Phenomenex Luna C18色谱柱,以0.1%甲酸(A)及V(甲醇)∶和V(乙腈)=4∶1混合液(B)作流动相,采用梯度洗脱(0 min,B为0%;33min,B为60%;66 min,B为88%;75 min,B为100%),流速:0.5 mL/min,离子阱质谱负离子模式进行检测。通过差谱方法对可能的代谢物进行快速搜索。对发现的重要的代谢物根据分子量以及多级质谱的碎片离子数据,结合体内代谢反应规律,进行指认和结构鉴定。共鉴定了3个主要的代谢物,其中一个为黄芩苷的代谢物,另两个为绿原酸的代谢物,后两个代谢物未见文献报道。本实验为研究复方中药复杂体系体内的代谢产物提供了一个有效而且快捷的模式。     

环戊烯开环聚合中的高效活化剂——多卤代苯酚

本文研究了苯酚、卤代苯酚和多卤代苯酚对 WCl_6-i-Bu_3Al 催化体系在环戊烯开环聚合中的活化效果。实验结果表明:(1)在苯环上至少有两个取代的氯原子的苯酚在芳烃中才能具有高活化作用;在烷烃中至少要有三个取代的氯原子的苯酚,如2,4,6-三氯苯酚、2,3,4,6-四氯苯酚和五氯苯酚,其活化效果才更显著。(2)在无活化剂或活化效果较差的苯酚和一溴苯酚存在下,溶剂效应次序:氯苯>甲苯(苯)>加氢汽油(庚烷、环已烷);在活化效果高的多卤代苯酚存在下,溶剂效应不显现。(3)比较了三种卤代烷基铝的助催化效果,其助催化活性次序:Et_2AlI>Et_2AlCl>Et_2AlBr。(4)双烯烃对环戊烯开环聚合有一定的调聚作用。在实验条件下聚合物反式链节含量没有明显改变。     

稀土催化丁二烯顺式聚合过程中的环化改性

采用ＮｄＣｌ３·３ｉ－ＰｒＯＨ－ＡｌＥｔ３稀土催化剂进行丁二烯的顺式聚合，在聚合过程中引入烯丙基氯，进行分子内环化反应以及单体的环聚反应．考察了稀土催化剂用量、ｎ（烯丙基氯）／ｎ（ＡｌＥｔ３）、环化时间、反应温度、单体浓度等对环化反应的影响，并对产物进行了红外光谱、核磁共振光谱的表征     

负载型CuO—ZnO／γ—Al2O3催化剂抗硫中毒性能的研究

采用XPS、TPR法证明浸渍法制备的CuO-ZnO/Al_2O_3催化剂中的CuO、ZnO和γ-Al_2O_3之间存在强相互作用,Cu量≤7.0wt%,Zn量≤11Wt%时,CuO和ZnO以单分子层分散在γ-Al_2O_3上.催化剂表面Cu和Zn实际含量的比值远小于配制时的比值(Cu/Zn=2),表明ZnO比CuO优先分布在表面.因ZnO比CuO更易和S作用生成ZnS,ZnO在表面的大量存在减少了Cu被S中毒的机率;另外CuO单层分散在Al_2O_3上,还原后生成的Cu~0,由于γ-Al_2O_3的拉电子作用使其处于缺电子状态(CU~(?+)),加上催化剂表面可能有部分CuO和Al_2O_3形成尖晶石,使一部分Cu以Cu~(n+)存在,Cu~((?)+)或Cu~(n+)对S的吸附弱.以上两个原因使负载型铜催化剂具有良好的抗硫中毒性能.     

HDDR过程中三元和多元Nd-Fe-B合金磁畴结构的MFM研究

用磁力显微镜研究了三元Nd-Fe-B合金在HDDR过程的不同阶段(铸态、不充分吸氢歧化、充分吸氢歧化和脱氢再复合)的破畴结构。在铸态样品表面清楚地观察到了易磁化轴互相垂直的柱状晶表面的两类磁畴图型。当样品不充分吸氢歧化和充分吸氢歧化时，破畴结构明显发生变化，反映了Nd-Fe-B的分解产物NdH2，α-Fe和Fe2B及其微晶结构的变化。脱氢再复合后形成的微晶的磁畴结构则表明样品保留了铸态样品柱状晶的构型。此外，还对比研究了多元Nd-Fe-B合金在HDDR过程中的磁畴结构，并根据微磁结构分析，指出过量的Ga元素添加可抑制Nd2(Fe，M)14B相的吸氢歧化，从而导致相应HDDR粘结磁体性能降低。     

Synthesis of new tetrazene（N-N=N-N）-linked bi（1,2,4-triazole）

The reaction of 4-amino-1,2,4-triazole with sodium dichloroisocyanurate (SDCI) afforded new tetrazene(N-N=N-N)-linked bi(1.2,4-triazole) 2a in excellent yield.Increasing the molar ratio of SDCI to 4-amino-1,2,4-triazole,the chlorinated product 1,5,5′- trichloro-4,4′-azo-1,2,4-triazole (2b) was formed.These new compounds have been characterized by MS,~1H NMR,~(13)C NMR,and elemental analysis.     

Rh(II)-catalyzed formation and rearrangement of trifluoroacetyl-containing sulfur ylides

A facile, convenient, efficient, and high yielding Rh(II)-catalyzed formation and rearrangement of trifluoroacetyl-containing sulfur ylides are reported. It is a Rh₂(OAc)₄-catalyzed [2,3]-sigmatropic rearrangement of sulfur ylide intermediates generated from α-diazo compounds.     

生物,环境样品和食品中铅的痕量分析

主要根据近七年来发表的有关论文，综述了我国生物、环境样品和食品中铅和痕量分析技术进展，内容包括分子光谱、原子光谱、电化学和其他分析方法，以及联用技术和前处理等方面，收集文献３９３篇。     

Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown from/on Zinc Substrates

Uniform ZnO nanorods arrays are grown directly from and on Zn foils in pure water under hydrothermal conditions at a relatively low temperature. The nanorods are 80–200 nm in diameter and ∼ 1 μm in length, which grow on the Zn foil along the [001] direction. By changing the pure water to a urea solution, a Zn compound ([Zn₅(OH)₆(CO₃)₂], a precursor of ZnO nanoflowers film, is created by self-assembly. The ZnO nanoflowers film can be easily obtained by heating the [Zn₅(OH)₆(CO₃)₂] compound in N₂ at 350∘C for 5–6 hours. Possible growth processes of the ZnO nanorods arrays and the [Zn₅(OH)₆(CO₃)₂] nanoflowers are discussed. Photoluminescence properties of the as-prepared ZnO nanostructures have been measured. The ZnO nanorods array synthesized using our method has minimal defects so that only band-gap emission is observed. However, the ZnO nanoflowers film, obtained by heating the [Zn₅(OH)₆(CO₃)₂] nanoflower precursor in N₂, is polycrystalline and displays strong defect-related emission.     

On-line nanoliter cycle sequencing reaction with capillary zone electrophoresis purification for DNA sequencing

An integrated system for DNA sequencing based on a nanoreactor for cycle-sequencing reaction coupled with on-line capillary zone electrophoresis (CZE) for purification and capillary gel electrophoresis (CGE) for separation is presented. Less than 100 nl of premixed reagent solution, which includes dye-labeled terminator pre-mix, bovine serum albumin and template, was hydrodynamically injected into a fused-silica capillary (75 microm I.D.) inside a laboratory-made microthermocycler for cycle sequencing reaction. In the same capillary, the reaction products were purified by CZE followed by on-line injection of the DNA fragments into another capillary for CGE. Over 540 base pairs (bp) of DNA can be separated and the bases called for single-standed DNA with 0.9% error rate. The total time was about 3.5 h, or a cycle time of 2 h with staggered operation. For double-stranded DNA, a longer reaction time was required and base calling up to 490 bp with 1.2% error rate was achieved. The whole system is readily adaptable to automated multiplex operation for DNA sequencing or polymerase chain reaction analysis.